What does each display do?
Trimble EZ Guide 250 System
This is an entry level display and covers all the basic Precision Farming needs. It comes as a complete kit for manual or lightbar guidance. After setting up your implements the display will paint or log coverage showing you were you applied a material or made a pass in the field. Following the lightbar guides you through the field while you are manually steering your tractor. You can add an EZ Steer steering system to give you hands free steering saving on overlap and inputs in your fields. You will use less fertilizer, seed, fuel and time in your operation. This system will also feed speed or a GPS signal out to another controller if needed as well. The 250 can run the WAAS correction signal.
Trimble XCN – 1050 System
The XCN-1050 is a midrange display and covers most of what you will need to do in your fields right now and allow you room to grow down the road. This comes as a complete kit for manual guidance. This is the newest display available and has a very advanced receiver that is performing exceptionally well in the field. A larger screen and a tablet; based system with apps and Wi-Fi capability. Adding the EZ Pilot steering system makes a tractor even if older and not guidance ready have auto steer like a new tractor from the factory. It will also plug into new tractor and steer them very accurately making for a simple operated display with ability to complete your turns on the end of row with Next Swath. You can also operate sprayers and planters with automatic section controls and rate/product control for up to two products with adding ISO BUS with allows for other options down the road. You can also control dry fertilizer spreader and manure spreaders with prescription application capability. The XCN-1050 can run WAAS, Rangepoint RTX, Centerpoint RTX, and our PLM RTK+ signal along with X-Fill. Allow for remote support and RTK/VRS direct with Wi-Fi for your PLM RTK+ signal. This is extremely user-friendly system that has made Precision Farming easy to understand and operate.
Trimble FM – 750 System
The FM 750 System is a midrange display that eventually the XCN-1050 will be replacing. The FM 750 is the most popular display we sell and is supported and available for the for seeable future. The FM 750 will do what you need to do in your fields right now and allow room to grow. This comes as a kit with manual guidance. You can add the EZ-Steer, EZ Pilot or Autopilot steering systems to this display. Running planters and sprayers doing automatic section control and rate control to save on inputs are possible. Population monitoring seed rate population, singulation, doubles, skips and seed spacing replaces and upgrades to an advanced monitor for your planter. You can also control dry fertilizer spreader and manure spreaders with prescription application capability. The FM 750 can run WAAS, Rangepoint RTX, Centerpoint RTX, and our PLM RTK+ signal along with X-Fill.
Trimble XCN-2050 System
This is the top of the line display and does more than the previous mentioned displays and is larger is size. Being a tablet; based display its features allow for room grow. Adding the EZ – Steer, EZ – Pilot or Autopilot is very flexible is steering a tractor that is not guidance ready or a newer tractor with factory guidance. It will do end of row turning with Next Swath. You can operate sprayers and planters with automatic section controls and rate controls. This display can do up to 6 product control at one time making it a good fit for planters. Population monitoring of seed rate, singulation, doubles, skips and seed spacing. Ability to do ISO BUS implements contact us about compatibility. You can control dry fertilizer and manure spreaders. You can gather yield information in a combine or chopper with a yield monitoring system. Implement Guidance keeping your implement on your guidance line while allowing tractor to steer offline when needed. Row guidance in your combine. Another level is water management capability. The XCN-2050 can Run WAAS, Rangepoint RTX, Centerpoint RTX and PLM RTK+ signal along with X-Fill. Allow for remote support with addition of Wi-Fi dongle. Has same interface as the XCN-1050 display or the older FM 1000. Has ability for adding a 2nd receiver for implement guidance or water management.