Fendt 943 Vario MT
Features
Fendt 900 Vario MT. The new generation.
- AGCO Power 9.8 L 7-cylinder engine with up to 431 hp.
- Fendt iD low engine speed concept
- Fendt Concentric Air System
- Fendt VarioDrive drive train concept
- Mobil-Trac System (MTS) with SmartRide hard-bar suspension
- 2-point mechanical cab suspension available
- Fendt Smart Farming functions
- Up to 116 GPM hydraulic power
- Standard Cat. III/IV rear power lift with 19,000 lb capacity
- 2-speed PTO shaft 1000 & 1000E
Specifications
| Model | 943 MT | |
| Engine | ||
| Rated power ECE R 120 | kW/hp | 317/431 |
| Maximum power ECE R 120 | kW/hp | 317/431 |
| No. of cylinders | Number | 7 |
| Cylinder bore/stroke | mm | 111/145 |
| Cubic capacity | cm³ | 9800 |
| Rated speed | rpm | 1700 |
| Max. torque at 1450 rpm | Nm | 1921 |
| Fuel level | litres | 681.0 |
| AdBlue tank | litres | 71.0 |
| Constant power range | rpm | 1600-1700 |
| Transmission and PTO | ||
| Transmission type | TA 300T | |
| Top speed | km/h | 40 |
| Rear PTO | 1000/1000E | |
| Engine rpm at rated speed of rear PTO (1000 PTO) | rpm | 1650 |
| Engine rpm at rated speed of rear PTO (1000E PTO) | rpm | 1255 |
| Power lift and hydraulics | ||
| Variable flow pump | l/min | 220 |
| Variable flow pump option 1 | l/min | 440 |
| Working pressure / control pressure | bar | 200 |
| Max. valves (front/centre/rear) | Number | 0/0/6 |
| Max. hydraulic oil filling | approx. litres | 125 |
| Max. available hydraulic oil volume | litres | 100 |
| Flow rate of control valves (all valves) | litres | 140 |
| Max. lift capacity of rear power lift | daN | 11500 |
| Electrical features | ||
| Max. transferable current ISOBUS socket | A | 60 |
| Caterpillar tracks | ||
| Central carrier suspension | SmartRide | |
| Swing angle of the primary suspension | degrees | 11 |
| Suspension travel of the front guiding wheel | mm | 260 |
| Chassis suspension | ConstantGrip | |
| Total width of driving wheel | mm | 225 |
| Total width of track roller | mm | 224 |
| Series caterpillar track | 25" Standard AG | |
| 1. Optional caterpillar track | 25" Extreme AG | |
| 2. Optional caterpillar track | 25" Extreme APP | |
| 3. Optional caterpillar track | 30" Extreme AG | |
| Dimensions | ||
| Track width (for series caterpillar track) | mm | 2032 |
| Minimum track width (for series caterpillar track) | mm | 2032 |
| Maximum track width (for series caterpillar track) | mm | 2235 |
| Total width for series caterpillar track | mm | 2667 |
| Overall length | mm | 5993 |
| Overall height - comfort cab | mm | 3515 |
| Max. ground clearance | mm | 368 |
| Wheel base (driving wheel to the front guiding wheel) | mm | 2565 |
| Weights | ||
| Unladen weight (base tractor with cab - full tanks, without driver) | kg | 15169.0 |
| Max. permissible overall weight | kg | 20900.0 |
| Max. trailer hitch load | kg | 3628.0 |
Looking for a specific part?
LET'S GET THAT FOR YOU.
