Fendt 933
Features
FendtONE - Customize. Organize. Optimize.
Special. Better. Fendt 900 Vario Spotlights
Fendt spotlights are unique innovations that make your work more productive, profitable, and easier. Learn about just some of these spotlights below.
FendtONE: Intuitive operation and unique connection for better machine and data management.
The new FendtONE operating experience provides even greater control, customization, and convenience. FendtONE offers dual 12” tablet-like displays that integrate all tractor functions and allows you to customize your controls. Integrated guidance, wireless data transfer, ISOBUS enable greater operational efficiencies.
More efficiency - performance combined with economy.
Fendt iD low-speed concept
- Perfect combination of all vehicle components such as engine, transmission, fan and hydraulics and all auxiliary consumers to ideal engine speeds- Reach the highest torque even at low engine speeds
- Permanently low fuel consumption
- Extended service life
Intelligent VarioDrive
- Seamless speed control from 60 ft./h to 33 mph
- Independent drive of front and rear axle
- No manual all-wheel drive necessary
- Optimum engine/transmission matching in conjunction with Fendt iD low-speed concept
- Smallest possible turning circle due to pull-in turn effect
- No need to change driving ranges
Self-cleaning air filter
- Air filter is blown out during work by means of short air blasts
- Reduced maintenance and increased reliability
More control and comfort
Fendt Stability Control
- Automatically reduces side lean at driving speeds above 12 mph and actively suppresses roll when cornering
- Increased control and improved driving comfort
Hood camera
- Direct view of the front linkage
- Easier attachment and removal of front weights
The FendtONE Infotainment Experience
- Eight strategically located microphones
- Crystal-clear, handsfree communication
- The enhanced rear soundbar surrounds you in an entertainment experience second-to-none
More grip, less slip
Integrated tire pressure control system VarioGrip
- Fully integrated tire pressure control system with on-board valve and air guidance technology
- Reduced compaction, improved ride quality, and reduced tire wear
- No risk of air lines being torn off thanks to protected design
- Simple operation via the terminal
Ready for the future. With smart solutions from Fendt.
Smart Farming - customized to fit your operation
- Select from four different unlocks to tailor the machine to your needs.
- Fendt Contour Assistant – adds contour segments and single track to familiar wayline types
- Fendt TI Headland – automated one touch headland sequences including guidance
- Fendt Section Control – control up to 144 sections for greater accuracy
- Fendt Variable Rate Control – improve placement through integrated integrated variable rate technology
Extended range of functions for Fendt Section Control and Fendt Variable Rate Control
- Automatic section control for up to five implements or application units simultaneously, support for up to 144 sections
- Variable control of the application rate per part-width section (zone) when the implement is suitably equipped, support for up to 144 zones
Specifications
| Engine | 933 |
| Rated power ECE R 120 at 1,700 RPM (HP ISO) (HP / kW) | 326 / 239 |
| Rated PTO power (HP / kW) | 264 / 197 |
| No. of cylinders / cooling | 6 cylinder / water |
| Cylinder bore / stroke (in. / mm) | 4.53 (115) x 5.70 (145) |
| Displacement (in.3 / l) | 549 / 9.0 |
| Rated engine speed (RPM) | 1,700 |
| Max. torque (@ 1,550 RPM) (ft/lb / Nm) | 1,217 / 1,650 |
| Torque rise (1,000 based on 1,700 RPM) (%) | 22.70% |
| Diesel tank capacity (gal / l) | 165 (625) |
| DEF capacity (gal / l) | 18.5 (70) |
| Oil change interval (operating hours) | 500 |
| Transmission / PTO | |
| Type / model | Stepless VarioDrive transmission / TA 300 |
| Speed range | Forward - 65 ft/hr to 31 mph / (20 m/h to 50 km/h) Reverse - 0.01 to 21 mph / (0.02 to 33 km/h) |
| Speed reduced max. speed | 31 mph (50 km/h) @ 1,200 RPM |
| Rear PTO | 1000 @ 1630 / 1000E @ 1,250 RPM |
| Hydraulics | |
| Type | Closed Center / Pressure & Flow Compensation |
| Hydraulic pump capacity (gpm / l/min) | 1 pump: 43.6 / 165, 58 / 220 2 pumps: 113.5 / 430 (55.5 / 210 + 58 / 220) |
| Working pressure (psi / bar) | 2,900 / 200 |
| Hydraulic control valves, max. rear/front | Single pump: 8 valves (6 rear / 2 front) Dual pump: 7 valves (6 rear / 1 front or 5 rear / 2 front) |
| 3-Point | |
| Type | Electrohydraulic Powerlift Control (EPC) with shock load stabilizing and standard load compensation |
| Rear lift capacity @ ball ends (lb / kg) | 21,500 / 9,750 |
| Max. lift capacity, front 3-Point (lb / kg) | 12,310 / 5,584 |
| Weights and Dimensions | |
| Unladen weight (lb / kg)* | 24,900 / 11,300 |
| Max. permissible overall weight (lb / kg) | 42,000 / 19,000 |
| Overall length (in. / mm) | 219.5 / 5,575 |
| Overall width (in. / mm) | 118.2 / 3,000 |
| Overall height (in. / mm) | 133 / 3,375 |
| Ground clearance (in. / mm) | 21.8 / 553 |
| Wheelbase (in. / mm) | 124 / 3,150 |
| Smallest turning circle with standard tires (ft / m) | 20 / 6.1 |
| Electrical Equipment | |
| Starter (V / kW) | 24 V - 7 kW |
| Battery (V / Ah) | 2 Batteries - 12 V/180 Ah |
| Alternator (V / A) | 14 V / 2 x 160 A |
