Massey Ferguson RK.662 TRC

Single Rotor

Cam Track
The optimised shape of the cam track, which is made of spheroidal graphite cast iron, provides maximum smooth running and quick, precise lifting of the tines.

Modern and Proven Design
The large-dimensioned drive unit and the precision-manufactured tine arm housing made of aluminium alloy, are both good examples of a modern and proven design.

Swath Deposit to the Right
All Massey Ferguson single-rotor rakes place the swath to the right. This way, you always have your perfect swath in view as the tractor operating controls are on the right.

Special Bolt-On Connection
The rake head is bolted together using a conical ring to form a sturdy unit. This has the advantage that the bolts are not subjected to any shearing effect, but rather only to compressive and tensile forces.

Tine Support
All MF tine supports are made of sturdy tube material and are manufactured from one piece of metal. The connection point to the tine arm is machined for a perfect fit, which makes it possible to insert the tine arms easily, and reduces wear to a minimum.

Tine Fixture
The tines are not pushed over the tine tube, instead each tine is screwed in from the bottom. The advantage of this is that the side of the arm facing the forage is absolutely smooth and therefore does not allow forage to stick to it.

Perfect Working Height
The linear height adjustment, which is fitted as standard, can very easily and conveniently adapt to the working height and your ground conditions.

Tangentially Arranged Tine Arms
Best raking quality is achieved with the tangential arrangement of the tine arms, creating an ideal swath. It makes significantly higher working speeds possible – the best

Two-Rotor Center Delivery

Automatic Height Limitation
The lowest transport height is always achieved regardless of the pre-selected working width. Because of the automatic height limitation in the headland position, it is no longer necessary to switch off the tractor PTO on headland turns.

Adjustable Working Width
The working width can be adjusted without tools and, combined with the externally adjustable control cam, enables the creation of an optimum swath for the machines following on behind.

Optimum Performance
Each rotor chassis on the MF RK 662, 762, 862, and 922 features four wheels per rotor assembly, while the 922 PRO model comes with six. All models are equipped with a tandem axle and 18-inch tires for optimum performance.

PRO Models - Twin Leading Wheels
The twin leading wheels were also redesigned to be larger and rigid in order to guarantee smooth running even under difficult conditions in a stubble field.

Two-Rotor Side Delivery

Two-Rotor Side Delivery Rakes
MF side delivery rakes provide the perfect flexible solution in all terrains. With these rakes it is possible to deposit two narrow swaths, one large swath or a double swath by making a return pass.

Large Overlaps Between Rotors
Large Overlaps Between Rotors
Large overlaps between rotors ensure a tidy forage transfer and swath formation even under difficult working conditions.