McHale ProPel T10-1260 Trailed Tedder

New Products / McHale / ProPel Tedders / ProPel T10-1260 Trailed Tedder

Double tap to zoom

ProPel Tedders

ProPel T10-1260 Trailed Tedder

The McHale PROPEL T10-1260 is the largest machine in the range. This trailed tedder is equipped with 10-rotors to provide a working width of 12.6M. This high capacity machine is transported on a carriage frame which links the tedder to the tractor when in operation

A 2-point linkage pivoting headstock connects the tedder to the tractor while all unfolding, lifting and lowering actions can be carried out using two double acting spools. The machine runs on wide transport tyres which are positioned in front of the rotors and enable them to float along the ground for clean tedding of the crop.

Get A Quote

Fields with asterisks* are required. Please email our helpful staff with any questions or comments using the contact form.

Loan Calculator

Use the Loan Calculator to help you determine the financing and payment options that are best for you.

**The accuracy of this calculator and its applicability to your circumstances is not guaranteed. You should obtain personal advice from qualified professionals. This information is provided for illustrative purposes only and does not constitute an application. This notice does not guarantee loan approval, nor is it an offer or commitment to make a loan to you on the above terms.

Send To A Friend

Fields with asterisks* are required. Your friend will receive an email that contains a reference to this page. Please send this email only to people you know who would be interested in this information.

Features
Specifications

Features

WORKING WIDTH: 12.6m(41′ 4″)
NO. OF ROTORS: 10
ROTOR DIAMETER: 1.58m (62″)
TINE ARMS PER ROTOR: 7
POWER REQUIREMENT: 50 kW(67 HP)
ATTACHMENT: Lower Linkage(CAT II)

Specifications

Dimensions & Weight
Transport Length	5.8 m (19′)
Transport Width	2.99 m (9′ 10″)
Transport Height	2.6 m (8′ 6″)
Weight	3,005 kg (6,625 lbs)
Tractor Attachment
Minimum Power Requirement	50 kW (67 HP)
Attachment	Trailed/ CAT II lower linkage
Recommended PTO Speed	580 rpm (SAE 6 spline PTO shaft)
Lighting	12 V / 7-pin socket
Hydraulic Systems	1x SA, 2x DA hydraulic
supply (1 with float)
Minimum Flow Rate	20 l/min (4.54 gal/min) @ 180 bar (2,610 psi)
Machine Specifactions
Number of Rotors	10
Rotor Diameter (including tines)	1.58 m (5′ 2″)
Working Width	12.6 m (41'4″)
Number of Tine Arms	7 (per rotor)
Chassis Tyres (380/55-17)	2
Rotor Tyres (170/60-8)	10 (1 per rotor)
Optional Equipment
Spare Rotor Wheel	Optional
Headland Management System	Optional

Amount Financed ($)
Interest Rate (%)
Loan Term in Months
Monthly Payment	Calculated