McHale ProPel T8-1020 Trailed Tedder

New Products / McHale / ProPel Tedders / ProPel T8-1020 Trailed Tedder

Double tap to zoom

ProPel Tedders

ProPel T8-1020 Trailed Tedder

The McHale PROPEL T8-1020 is a high capacity trailed tedder fitted with 8-rotors to provide a working width of 10.2M. This straight-forward, highly efficient, machine is fitted with a long carriage frame that connects the tedder to the tractor when in operation and serves as a carrier when in transit.

The machine is attached using a 2-point linkage and can be easily unfolded, lifted and lowered using only two double acting spools. Wide transport tires in front of the rotors allow the rotors to float freely, providing superior floation and help prevent soil contamination.

Get A Quote

Fields with asterisks* are required. Please email our helpful staff with any questions or comments using the contact form.

Loan Calculator

Use the Loan Calculator to help you determine the financing and payment options that are best for you.

**The accuracy of this calculator and its applicability to your circumstances is not guaranteed. You should obtain personal advice from qualified professionals. This information is provided for illustrative purposes only and does not constitute an application. This notice does not guarantee loan approval, nor is it an offer or commitment to make a loan to you on the above terms.

Send To A Friend

Fields with asterisks* are required. Your friend will receive an email that contains a reference to this page. Please send this email only to people you know who would be interested in this information.

Features
Specifications

Features

WORKING WIDTH: 10.2m(33′ 6″)
NO. OF ROTORS: 8
ROTOR DIAMETER: 1.58m (62″)
TINE ARMS PER ROTOR: 7
POWER REQUIREMENT: 45 kW(60 HP)
ATTACHMENT: Lower Linkage(CAT II)

Specifications

Dimensions & Weight
Transport Length	5.8 m (19′)
Transport Width	2.99 m (9′ 10″)
Transport Height	2.6 m (8′ 6″)
Weight	2,605 kg (5,743 lbs)
Tractor Attachment
Minimum Power Requirement	45 kW (60 HP)
Attachment	Trailed/ CAT II lower linkage
Recommended PTO Speed	480 rpm (SAE 6 spline PTO shaft)
Lighting	12 V / 7-pin socket
Hydraulic Systems	1x SA, 2x DA hydraulic
supply (1 with float)
Minimum Flow Rate	20 l/min (4.54 gal/min) @ 180 bar (2,610 psi)
Machine Specifactions
Number of Rotors	8
Rotor Diameter (including tines)	1.58 m (5′ 2″)
Working Width	10.2 m (33'6″)
Number of Tine Arms	7 (per rotor)
Chassis Tyres (380/55-17)	2
Rotor Tyres (170/60-8)	8 (1 per rotor)
Optional Equipment
Spare Rotor Wheel	Optional
Headland Management System	Optional

Amount Financed ($)
Interest Rate (%)
Loan Term in Months
Monthly Payment	Calculated